Our Location

Unit 703, PARC HOUSE II, Epifanio de los Santos Ave, Makati, 1212 Metro Manila
(Philippines)

DC Gear Motor 6V 133RPM – SGM25-370

305.75

This Low Power 6V DC Motor with GearBox 133RPM – SGM25-370 is intended to run at 6V but can be driven with lower voltage up to 3V at the expense of power. To control the speed and direction of the motor you will need a motor driver, this particular model SGM25-370 requires only 380mA current to operate, we recommend low power motor driver such as L298, and TB6612FNG

Check out our DC motor bracket, you might need it.

Category:

DC Gear Motor 6V 133RPM – SGM25-370

This Low Power 6V DC Motor with GearBox 133RPM – SGM25-370 is intended to run at 6V but can be driven with lower voltage up to 3V at the expense of power. To control the speed and direction of the motor you will need a motor driver, this particular model SGM25-370 requires only 380mA current to operate, we recommend low power motor driver such as L298, and TB6612FNG

Check out our DC motor bracket, you might need it.

Warning: Stalling or overloading gear motors can greatly decrease their lifetimes and even result in immediate damage.

Spur Gear vs. Planetary Gear:

The two most common setup of DC motor gearbox are spur and planetary. Spur type gearbox are simpler, less expensive, and work best for low torque applications. Torque capacity of spur type gearbox is limited because each gear in the train bears different load. Planetary gearboxes, in contrast, share equal load over multiple gears, making them more durable for high torque application.

Specifications:

  • Gearbox: Spur Gear
  • Rated Voltage: 6 V
  • Operating Voltage Range 2~7.5V
  • Gear reduction ratio: 45:1
  • D output shaft diameter: 4 mm
  • No-load speed: 133 RPM @ 6 v
  • No-load current: 0.13 A
  • Locked-rotor torque: 4.5 kg.cm
  • Locked-rotor current: 2.3 A
  • Operating Temperature: -20?60?
  • Weight: 90 g

Reviews

There are no reviews yet.

Be the first to review “DC Gear Motor 6V 133RPM – SGM25-370”

Your email address will not be published. Required fields are marked *