BG-150-48 IP67 150W Waterproof Electronic LED Driver
Model: BG-150-48
OUTPUT
DC voltage: 48V
Rated current: 3.1A
Current range: 0 ~ 3.1A
Rated power: 148.8W
Ripple & noise: 200mVp-p
Setup, rise, hold time: 500ms, 20ms,20ms/230VAC
INPUT
Voltage range: 85~132VAC / 176~264VAC selected by switch 240~370VDC
Frequency range: 47 ~ 63Hz
Efficiency: 85%
Ac current: 3.2A/115VAC 1.6A/230VAC
Inrush current: Cold start 40A
Leakage current: <2mA/240VAC
PROTECTION
Overload: 115 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Over voltage: 55~64V
Protection type: Shut off
ENVIRONMENT
Working temp, humidity: -20? ~ +60?,20% ~ 90% RH non-condensing
Storage temp, humidity: -20? ~ +85?,10% ~ 95% RH non-condensing
Withstand vibration: 10 ~ 500Hz, 2G 10min/1cycle,period for 60min. each axes
SAFETY & EMC
Safety standard: Design refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved
Withstand voltage: I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC standard: EN55015,EN55022,EN55024,EN61000-3-2,EN61000-3-3,EN61547 approved
OTHERS
MTBF: 500K hrs
Dimension: 222*68*42mm (L*W*H)
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25? of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
Reviews
There are no reviews yet.